Online Service
Free Hotline

Welcome to the website of Zhejiang Ruixiang Lighting Co.,Ltd.!

News Center

Contact us

Zhejiang Ruixiang Lighting Co.,Ltd.

Phone:13905703177(Mr.Yu)

Tel:0570-6121818

Fax:0570-6121858

E-mail:zjrxzm@163.com

Address:No.7,Yuansan Road,Ecological industrial Park,Kaihua County

  • How to use mosquito killer
  • date: 2017-9-14 hits:313 
  •  

    1. Be sure to pay attention to the power supply voltage and frequency before use. The socket must be equipped with a reliable grounding wire.


    2. Place the mosquito killer in an open space of one meter high. When the environment is dark and static, the mosquito killer has the fastest mosquito killing speed and the best effect.

    3. Use an indoor area of ​​50m2~60m2 and an outdoor area of ​​100m2. For the first time, it is best to choose to close the doors and windows or screen screens when the night is dark. Turn off the lights and leave the people to concentrate on mosquito killing for 2~3 hours. People will not go back indoors until the next morning, for 1~2 weeks. . During the summer or during mosquito activities, it can be used every day to eliminate mosquitoes that do not leak into the room.

    4. Use in offices and business premises. You can start killing mosquitoes and flies before the end of work in the evening, turn off the lights, and trap them overnight. The indoor mosquitoes can be basically eliminated.

    5. When cleaning the fly-killing mosquito lamp, be sure to cut off the power supply and use a screwdriver to discharge the high-voltage power grid. When discharging, you must take the insulated part of the screwdriver to prevent electric shock.

    6. When killing mosquitoes and killing mosquitoes, electric sparks will occur during work. Therefore, all places and places where there is much dust and flammable and explosive possibility are strictly prohibited to avoid accidents.

    1. When selecting a product, it is necessary to select the appropriate amount of mosquito-killing and fly-killing lamps according to the density of specific pests and the area of ​​the site to achieve the desired killing effect.

    2. Before use, check whether the voltage and frequency are consistent with the product, and use the power socket that matches the product. The ground wire of the socket must be well grounded, then connected to the power supply, turn on the power switch, and see the purple light in the lamp. The work of killing and killing mosquitoes has begun work.

    3. When the fly-killing mosquito lamp works, it is normal for mosquitoes and other flying insects to make a "beep" sound when they hit the net.

    4. After using for a period of time, when the bottom of the lamp is found to accumulate more mosquitoes and debris, it should be cleaned up in time. When cleaning, the power must be cut off first, and the insulated part of the screwdriver should be taken. The two metal wires between the grids should be touched by the metal rod of the screwdriver. Disconnect and discharge, then press the outer net with two thumbs, take out the rear net, and take out the chassis for cleaning.

  • Pre:How does the UV lamp work?
    Next:AI时代,智能照明真的有必要吗?当然啦
  • back